See the fault from the color of the exhaust gas. Can you?

Release Time:2017-11-15 
Abst:When the owner of the new car found smoke in the exhaust pipe, he knew that the car had failed, but he was still busy with the house and was at a loss. In fact, in such a situation, as long as you can

When the owner of the new car found smoke in the exhaust pipe, he knew that the car had failed, but he was still busy with the house and was at a loss. In fact, in such a situation, as long as you can judge the car breakdown from the color of the exhaust, then you no longer have to panic.

 


First, blue smoke


Performance: The explosive power of the vehicle is reduced, the acceleration is weak, the noise is increased, the exhaust pipe is discharged with blue smoke, the burnt smell produced by the burning of the organic oil, and the consumption of the oil is increased.


Reason: Most of the blue smoke is caused by internal engine failure, which causes the oil to burn into the combustion chamber.


Solution: Always check the sealing of cylinders, pistons, etc.; add oil in moderation, check the oil usage regularly, such as abnormal fuel consumption, and promptly go to the repair shop for repair.


Second, black smoke


Performance: The engine of the car has large jitter, and the exhaust pipe has an abnormal sound, and the black smoke body is discharged at the same time, and it feels weak when accelerating.


Reason: Most of this happens in the carburetor car. Excessive fuel enters the cylinder and then burns out of the car, causing the car to emit black smoke.


Solution: Always check the aging degree of the carburetor and other parts, and often carry out maintenance and adjustment; EFI vehicles should check the cylinder line every 30,000 kilometers, check the spark plug every 10,000 kilometers, and replace it if there is any problem.


Third, white smoke


Performance: The engine is not running smoothly. When the engine is warmed up to the normal working water temperature, a large amount of water vapor still emerges, and a large amount of white water vapor emerges.


Cause: The cylinder head of the engine cylinder is worn, creating a certain gap, causing a large amount of water in the heat dissipation system to enter the combustion chamber. The water cannot be burned, and after being heated, water vapor is generated and discharged directly from the exhaust pipe.


Solution: Check the engine block and cylinder head gasket for damage, check whether there is any water in the fuel tank; check the car manual and add the correct gasoline according to the manufacturer's specifications.


Copyrights © 2018 All Rights Reserved by Goomay Inc.

技术支持:谷美科技